🦬 Ford Focus 1.6 Tdci Alternator Problems

Tue 13 Dec 2016 11:04. Ford Focus 1.6 TDCI - Noise on cold start up - gordonbennet. Possible DMF failing, water pump, cambelt idler, alternator, aircon pump etc, you could isolate auxilliary belt driven driven items by removing the belt the night before and then doing a cold start with it off. No need to go into any possible engine problems I have a Ford Focus Zetec 1.6 TDCI '55 reg and I have had nothing but problems the whole two years I have owned it! Granted I knew it had high mileage when I bought it (88k) but in the last two years I have had to replace the Alternator, the Timing Belt and just two days ago the Inlet Manifold. The level will change depending on how much air gets trapped in the engine and pipework. If you need to add coolant, I would say it was a small CH gasket leak. The gas pressure in the cylinder peaks at maybe 120bar, maybe more, so a tiny leak will force gas into the coolant to pressurise it. I have a 2005 mk2 2.0tdci 136 focus. For the last couple of months i've been having problems getting it started from cold. It's had new glow plugs, new EGR valve, new battery, but not fixed. From cold, it may or may not fire up first time but then after running for a few seconds at idle it dies. I decided to show you guys a quick video to give you guys an idea on how to remove the Alternator on the ford focus 2011-2018 with the 2.0 liter engine. I de Hi. I have ford focus 2012, about a year ago battery light started to show up. took it to a garage tested battery was fine so I was told need to change the alternator, Changed the alternator but light stills shows up randomly and sometimes disappear itself. the alternator was brand new. car runs fine as it has been ever since. a couple of times whilst driving the car jammed for a second and Good day all!Has the cold weather effected your charge system?? Does your Alternator require changing?Never fear Jim is here with another "how to" videoLets If your Focus won’t start, one of the common causes is a failed Focus crank sensor. Today I’ll be showing you how to test your Ford crank position sensor in a 2007 Ford Focus ZX4 with a 2.0 liter ZETEC engine in it. In order to complete this testing guide for your Focus crank sensor, you will need to use a digital multimeter. Problems with TE0q.

ford focus 1.6 tdci alternator problems