⛈️ How Do I Know If My Car Has An Immobiliser

Turn the car off and disconnect both cables from your car battery, negative first. Find the ignition switch plate on the steering column and use a screwdriver to loosen the panel, then remove it and put it somewhere safe. Find the anti-theft alarm wire. Read your owner’s manual — don’t guess at it! Cut the wire and wrap it in electrical tape. Hyundai releases anti-theft software upgrade for 4 million cars after insurers drop some models. Saleen Martin. USA TODAY. 0:03. 1:07. Almost 4 million Hyundai Elantra, Sonata and Venue drivers Car companies fit as standard a Thatcham category 2 immobiliser or category 1 alarm to nearly all new cars built for the UK market. Privately imported car models or older cars will have no Thatcham approved security at all so your insurance company may ask for an aftermarket alarm or immobiliser to be fitted. Inside the switch there is an antenna which receives this signal and sends it to the car's computer. If the signal is the same as the one the car has saved, then the driver will be allowed to start the car. The immobilizer is automatic and manual activation is never needed. Remember that you can check if your car has this system or not in your Engine Immobilizer. An Engine Immobilizer in simple words is an electronic security device that is used by billions of modern vehicles around the globe. An Engine Immobilizer technologically uses an electronic chip that is embedded into the ECU of the vehicle to comprehend smart key codes and turn on the ignition on your vehicle. How do I test my cars immobiliser? You can rest assured that your car has a factory-fitted immobiliser if it was manufactured after October 1998. However, if your car was made before that date and you want to check if it has an immobiliser, the easiest way to check is to contact your car’s manufacturer or consult your owner’s manual. This is a combination of Category 2 and Category 1. It involves adding a Thatcham-approved Category 2-1 alarm system to a vehicle already equipped with a Category 2 immobiliser. This upgrade provides an enhanced level of security by incorporating an alarm alongside the immobiliser, giving the vehicle Category 1 status. I have a problem with immobiliser when I start the car. When I turn the key the immo light starts flashing. I need to try to turn the key few times before it works. Sometimes I have a problem with remote opening the car. I need to open it with key and turn the ignition on to unlock the rest of locks. NnS3f8N.

how do i know if my car has an immobiliser